Professional China Polyurethane Stator And Rotor - Rubber Stator And Rotor Of Flotation Machine – Arex
Professional China Polyurethane Stator And Rotor - Rubber Stator And Rotor Of Flotation Machine – Arex Detail:
The stator and rotor, mainly used in flotation machine of XJK series, XJQ series, SF series, BF series, KYF series, XCF series, JJF series, BS-K series.
The rotor and stator of the flotation machine are mainly composed by metal skeleton inserts and wear-resistant rubber. Metal skeleton inserts are made of advanced flame cutting and then welded accurately under strict process standards. The strength and balance performance of the skeleton inserts are guaranteed by balancing detection through dynamic balancer. The rubber rotor and stator of flotation machine surface were bonded with wear-resistant rubber and then vulcanized at high temperature.
Our company has 3600 tons of super large flat plate vulcanizer and have the capability to produce the rotor and stator of flotation machine from diameter 200 to 2400 mm. If the demand is more special, we can customize it according to customer requirements.
Properties of rubber material
|
Item |
Unit |
Index |
|
Tensile strength ≥ |
17 |
|
|
Acid (base)coefficient 20%H₂SO₄（20%NaOH）18℃x24h |
0.8 |
|
|
Elongation at break ≥ |
% |
450 |
|
Hardness |
Shore hardness A |
55±5 |
|
Hot air aging coefficient≥90℃x24h |
0.75 |
|
|
Abrasion loss |
cm³/1.61km |
0.7 |
|
Metals and layer adhesion≥ |
MPa |
2.5 |
|
Tearing permanent deformation≤ |
% |
30 |
|
Oil coefficient 20# oil 100℃x24h |
% |
±10~5 |
Features
1. Abrasion resistance
2. Tear resistance
3. Impact resistance
4. Chemical stability
5. Long service life
Wear solution
1.Detecting the wear patterns and rate in the critical area and reinforce the characterize through the working process.
2.By using more rubber or polyurethane material to the place where need most in the whole part. And this will elongate life for working.
3.Giving professional inspection and maintenance when using it by our customers. And getting the regular update report in the operation process, which will supply and increase the plant availability.
Steel skeleton
1.The raw material is using 3CR12 stainless steel bosses, in case of rust and bolt in locking.
2.Welding process reply on ISO standards by experienced workers and keep the balance and accurate when grooving.
3.Customizing work depends on client’s requirement or find the solution from our technology team.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of Professional China Polyurethane Stator And Rotor - Rubber Stator And Rotor Of Flotation Machine – Arex , The product will supply to all over the world, such as: Egypt, European, Austria, We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
By Jonathan from Iran - 2017.08.16 13:39
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Antonio from Oslo - 2017.01.28 19:59
