Mobile Phone
+8615733230780
E-mail
info@arextecn.com

SPR Slurry Pump Parts

Short Description:


Product Detail

Product Tags

SPR Slurry Pump Casing

 SPR Slurry Pump Parts1 SPR Slurry Pump Parts2 

Rubber Slurry Pump Body (Casing) interchangeable with Warman SPR series Rubber Vertical Slurry Pumps
We offer a variety of rubber casing, so that customers can apply in a variety of complex environments. 

SPR Slurry Pump Parts4SPR Slurry Pump Parts5

RUBBER MATERIALS TYPE AND DATA DESCRIPTIONS

Code Material name Type Description
YR26 Anti-thermalBreakdown Rubber  Natural Rubber YR26 is a black, soft natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications. The antioxidants and anti-degradants used in RU26 have been optimized to improve storage life and reduce degradation during use. The high erosion resistance of RU26 is provided by the combination of its high resilience, high tensile strength and low Shore hardness.
YR33 Natural Rubber(Soft)  Natural Rubber YR33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.
YR55 Anti-thermalNatural Rubber  Natural Rubber YR55 is a black, Anti-corrosive natural rubber. It has superior erosion resistance to all other materials in fine particle slurry applications.
YS01 EPDM Rubber Synthetic Elastomer  
YS12 Nitrile Rubber Synthetic Elastomer Elastomer YS12 is a synthetic rubber which is generally used in applications involving fats, oils and waxes. S12 has moderate erosion resistance.
YS31 ChlorosulfonatedPolyethylene (Hypalon) Synthetic Elastomer YS31 is an oxidation and heat resistant elastomer. It has a good balance of chemical resistance to both acids and hydrocarbons.
YS42 Polychloroprene (Neoprene) Synthetic Elastomer Polychloroprene (Neoprene) is a high strength synthetic elastomer with dynamic properties only slightly inferior to natural rubber. It is less effected by temperature than natural rubber, and has excellent weathering and ozone resistance. It also exhibits excellent oil resistance.

The rugged SP/SPR Heavy Duty Sump Pumps are available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in:
• Minerals processing
• Coal preparation
• Chemical processing
• Effluent handling
• Sand and gravel
and almost every other tank, pit or hole in the ground slurry handling situation.
The SP/SPR design with either hard metal (SP) or elastomer covered (SPR) components makes it ideal for:
• Abrasive and/or corrosive slurries
• Large particle sizes
• High density slurries
• Continuous or “snore” operation
• Heavy duties demanding cantilever shafts

*SPR RUBBER LINED VERTICAL SLURRY PUMPS CASING DATA

Model Casing code Rubber material Product Weight (KG)
40PV-SPR SPR4092 R26, R55, R33, S01, S10, S12, S31, S42 11.2
65QV-SPR SPR 65092 R26, R55, R33, S01, S10, S12, S31, S42 36.2
100RV-SPR SPR10092 R26, R55, R33, S01, S10, S12, S31, S42 64.6
150SV-SPR SPR15092 R26, R55, R33, S01, S10, S12, S31, S42 120

SPR Slurry Pump Column

 SPR Slurry Pump Parts6 SPR Slurry Pump Parts7 

*We offer columns of various sizes to ensure that you can use them at any underground depth
*Unique adhesive rubber process to meet all kinds of acid-base media
*High quality flange, standard screw hole, more convenient and fast installation

SPR VERTICAL SLURRY PUMP STRUCTURE CHART

*SPR SLURRY PUMPS COLUMN DATA

Model Back Liner code Rubber material Length (MM)
40PV-SPR PVR4102* R26, R55, R33, S01, S10, S12, S31, S42 600.900.1200.1500.1800
65QV-SPR QVR65102* R26, R55, R33, S01, S10, S12, S31, S42 600.900.1200.1500.1800
100RV-SPR RVR10102* R26, R55, R33, S01, S10, S12, S31, S42 600.900.1200.1500.1800
150SV-SPR SPR15102* R26, R55, R33, S01, S10, S12, S31, S42 600.900.1200.1500.1800

SPR Slurry Pump Open Impeller

SPR Slurry Pump Parts9 SPR Slurry Pump Parts10

-The impeller has large and open passages and can transfer the slurry effectively, providing good dynamic and static balance to achieve little vibration and low noise in operation.
-The open type impeller exhibits higher efficiencies and is less prone to wear in the front liner region.
-Higher productivity, increased profitability and ease maintenance
-Double suction impellers create low axial bearing loads, increasing bearing life

 SPR Slurry Pump Parts11

*SPR RUBBER LINED VERTICAL SLURRY PUMPS IMPELLER DATA

Model Impeller code Rubber material Product Weight (KG)
40PV-SPR SPR4206 R26, R55, R33, S01, S10, S12, S31, S42 1.4
65QV-SPR SPR65206A R26, R55, R33, S01, S10, S12, S31, S42 6.2
100RV-SPR SPR10206A R26, R55, R33, S01, S10, S12, S31, S42 13.4
150SV-SPR SPR15206A R26, R55, R33, S01, S10, S12, S31, S42 29

SPR Slurry Pump Discharge Pipe

 SPR Slurry Pump Parts12

*We offer discharge pipe of various sizes to ensure that you can use them at any underground depth
*High quality flange, standard screw hole, more convenient and fast installation
*Unique adhesive rubber process to meet all kinds of acid-base media

Type SP\SP(R) pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high-density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
All parts of type SP(R) pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle.
Wet parts of type SP pumps are made of abrasion-resistant metal.

*SPR SLURRY PUMPS DISCHARGE PIPE DATA

Model Back Liner code Rubber material Length (MM)
40PV-SPR PVR4154* R26, R55, R33, S01, S10, S12, S31, S42 600, 900, 1200, 1500, 1800
65QV-SPR QVR65154* R26, R55, R33, S01, S10, S12, S31, S42 600, 900, 1200, 1500, 1800
100RV-SPR RVR10154* R26, R55, R33, S01, S10, S12, S31, S42 600, 900, 1200, 1500, 1800
150SV-SPR SPR15154* R26, R55, R33, S01, S10, S12, S31, S42 600, 900, 1200, 1500

SPR Slurry Pump Rubber Back Liner

 SPR Slurry Pump Parts13 SPR Slurry Pump Parts14 SPR Slurry Pump Parts15

Features of SPR vertical slurry pump:
1) High Efficiency Non-block up

The uniquely designed single, double-gate impeller, opening model, double leaf model impeller is high effective without block-up, the pump casing etc. flow- through parts designed for completing with the impeller can be selected with their materials and models upon the transported media and can be made sure of the excellent hydraulic performance and working life in the transportation of the media containing suspended grains and long fibers, corrosive and abrasive.

2) Stable; Durable without vibration

Vertical slurry pump is vertically structured, the drive unit (motor stand, clutch, drive shaft, connecting stand, bearing) is modular designed and can be superposed at will along with the variation of the under-water depth. Both pump casing and impeller can be placed under liquid by 0.5-10m and the motor above the liquid surface, then, via connection with the drive unit, directly drives the non-block impeller to stably run without vibration.

3) Easy use; Long durability

The impeller is submerged in water and easy to start. An automatic liquid-level control cabinet can be fitted with required by users so as to get the liquid-level to control the pumps starting and stopping, without need of a special person to look after.

Solid maintenance-free design, good rigidity of the pump shaft and fully-closed roller bearing of a famous brand. The pre-injected high-temperature withstanding lubricating grease

*SPR Rubber Lined Vertical Slurry Pumps Back Liner data:

Model Back Liner code Rubber material Product weight (KG)
40PV-SPR SPR4041 R26, R55, R33, S01, S10, S12, S31, S42 5.6
65QV-SPR SPR65041 R26, R55, R33, S01, S10, S12, S31, S42 25
100RV-SPR SPR10041 R26, R55, R33, S01, S10, S12, S31, S42 31
150SV-SPR SPR15041 R26, R55, R33, S01, S10, S12, S31, S42 65

SPR Slurry Pump Parts16

 

FEATURES
Setting depths from 0.9m to 2.4m
Concentric casing minimizes shaft load over wide operating ranges and reduces wear
Simple installation
Cantilever design so there are no submerged bearings or shaft seals
Cast bearing housings result in increased critical speeds and lower vibration levels than legacy equipment
Can run dry (snore) continuously
Large impeller passages means a reduced risk of blockage
Top and bottom inlets are suitable for snore conditions, with no need for priming and self-venting
Available in a pre-fabricated conical sump with quick clean facilities
Replaceable strainers allows for easy maintenance
Ease of maintenance
169c38a5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

  • Previous:
  • Next:

  • Write your message here and send it to us